5050 T10 5SMD LED Light

RM12/pair

 

Feature:

Base Type:T10
Voltage:12V
Super bright :white
5PCS 5050 Chip
Long-lasting LED
Save your power supply
Unique and attractive colorlight
T10 - Cross Reference:
(194/168) 147 152 158 159 161 168 184 192 193 194 259 280 285 447 464 501 555 558 585 655 656 657 1250 1251 1252 2450 2652 2921 2825
Color Available: White, Blue, Green, Red, Yellow and Pink

 

 

 

For use in your vehicle's:

Dashboard lights
Interior lights
Side lights
Licence plate lights
Side Door

 

 

 

Instruction on How to Replace a Tail, Brake and Reverse Light:

How to Replace a Tail, turn signal light, corner light, parking light, side marker light, tail light and brake or reverse light?

Replacing a dead bulb on your car is almost as easy as replacing a light bulb at home. Perform this simple maintenance and avoid the hassle of receiving a citation for a missing brake light.

• Determine how the bulb is accessed: On some models the lens (the red or white plastic part over the light) must be unscrewed from the outside, and on others the bulb is accessible only from inside the trunk. If there are no screws on the lens, you can assume that the bulb must be replaced from inside. Usually there will be a plastic cover that must be removed in order to access the bulb. There may be tabs, screws or small knobs that hold this plastic cover in place.
• Unscrew the lens on the outside, or take off the plastic cover from inside the trunk, to reveal the bulb.
• Unscrew the bulb. You'll have to push in and turn at the same time.
• Take the bulb with you to the auto supply store to help you find an exact duplicate.
• Clean the connection with a wire brush and/or wipe it clean with a rag if there's any corrosion.
• Screw the new bulb into the empty socket. Again, you'll have to push in and turn simultneously. Line up the tiny raised bumps on the base of the bulb in order to screw it in.
• Replace the lens or the plastic cover.
• Test your work by stepping on the breakes and turning on the headlight while a friend watches the new bulb to make sure it light up.